Seba na module şıma şenê yû pela dokumani vırazê Modul:Convert/extra/dok

-- Extra conversion data used by Module:Convert.
--
-- [[Module:Convert/data]] defines all units and is transcluded in all pages
-- where [[Module:Convert]] is used. Testing new units by editing that module
-- would invalidate the cache for all affected pages.
--
-- For quick changes and experiments with new units, this module can be edited.
-- Since this module is transcluded in only a small number of pages, changes
-- should cause little server overhead and should propagate quickly.
--
-- If a unit is defined in the data module, any definition here is ignored,
-- so defining the same unit in both modules is not an error.
-- A unit defined here can refer to units that are also defined here, and
-- can refer to units defined in the data module.
--
-- Periodically, those extra units that are wanted permanently can be removed
-- from here after being added to [[Module:Convert/data]].

local extra_units = {
    ["AUtbsp"] = {
    name1    = "Australian tablespoon",
    symbol   = "AUtbsp",
    utype    = "volume",
    scale    = 0.000020,
    default  = "mL",
    },
    ["kcal/mol"] = {
    per      = { "kcal", "mol" },
    utype    = "energy per chemical amount",
    default  = "kJ/mol",
    link     = "Kilocalorie per mole",
    },
    ["kJ/mol"] = {
    per      = { "kJ", "mol" },
    utype    = "energy per chemical amount",
    default  = "kcal/mol",
    link     = "Joule per mole",
    },
    ["kg/ha"] = {
	per      = { "kg", "ha" },
	utype    = "pressure",
	default  = "lb/acre",
	multiplier= 9.80665,
    },
    ["lb/acre"] = {
	per      = { "lb", "acre" },
	utype    = "pressure",
	default  = "kg/ha",
	multiplier= 9.80665,
    },
    ["sqperch"] = {
	name2    = "perches",
	symbol   = "perch",
	usename  = 1,
	utype    = "area",
	scale    = 25.29285264,
	default  = "sqm",
	link     = "Perch (unit)#Area",
    },
    -- Using "-rood" as a temporary fix; this should be in "rood" in Module:Convert/data.
    ["-rood"] = {
	symbol   = "rood",
	usename  = 1,
	utype    = "area",
	scale    = 1011.7141056,
	default  = "sqft sqm",
	subdivs  = { ["sqperch"] = { 40, default = "m2" } },
	link     = "Rood (unit)",
    },
    ["tonne/acre"] = {
	per      = { "tonne", "acre" },
	utype    = "pressure",
	default  = "tonne/ha",
	multiplier= 9.80665,
    },
    ["tonne/ha"] = {
	per      = { "tonne", "ha" },
	utype    = "pressure",
	default  = "tonne/acre",
	multiplier= 9.80665,
    },
	["ug/l"] = {
	target   = "µg/l"
	},
	["µg/l"] = {
	per      = { "µg", "l" },
	utype    = "density",
	default  = "oz/cuin",
	},
	["mg/l"] = {
	per      = { "mg", "l" },
	utype    = "density",
	default  = "oz/cuin",
    },
	["oz/lb"] = {
	per      = { "oz", "lb" },
	utype    = "concentration",
	default  = "mg/kg",
	},
	["mg/kg"] = {
	per      = { "mg", "kg" },
	utype    = "concentration",
	default  = "oz/lb",
	},
}

return { extra_units = extra_units }